View source for Basic Physics of Nuclear Medicine/Production of Radioisotopes

[[File:Advanced Test Reactor.jpg|thumb|<span style="color:white;">.</span>]]

Most of the radioisotopes found in nature have relatively long half lives.  They also belong to elements which are not handled well by the human body.  As a result medical applications generally require the use of radioisotopes which are produced artificially.

We have looked at the subject of radioactivity in earlier chapters of this wikibook and have then progressed to cover the interaction of radiation with matter, radiation detectors and imaging systems.  We return to sources of radioactivity in this chapter in order to learn about methods which are used to make radioisotopes.

The type of radioisotope of value to nuclear medicine imaging should have characteristics which keep the radiation dose to the patient as low as possible.  For this reason they generally have a short half life and emit only gamma-rays - that is no alpha-particle or beta-particle emissions.  From an energy point of view the gamma-ray energy should not be so low that the radiation gets completely absorbed before emerging from the patient's body and not too high that it is difficult to detect.  For this reason most of the radioisotopes used emit gamma-rays of medium energy, that is between about 100 and 200 keV.  Finally since the radioisotope needs to be incorporated into some form of radiopharmaceutical it should also be capable of being produced in a form which is amenable to chemical, pharmaceutical and sterile processing.

The production methods we will consider are nuclear fission, nuclear bombardment and the radioisotope generator.

== Nuclear Fission ==

We were introduced to spontaneous fission in [[Basic Physics of Nuclear Medicine/Radioactive Decay#Spontaneous Fission|chapter 2]] where we saw that a heavy nucleus can break into a number of fragments.  This disintegration process can be induced to occur when certain heavy nuclei absorb neutrons.  Following absorption of a neutron such nuclei break into smaller fragments with atomic numbers between about 30 and 65.  Some of these new nuclei are of value to nuclear medicine and can be separated from other fission fragments using chemical processes.

The fission process is controlled inside a device called a [[W:Nuclear reactor|nuclear reactor]].  One such reactor exists in Australia at [[W:OPAL|Lucas Heights in New South Wales]] and many others exist throughout the world.

== Nuclear Bombardment ==

In this method of radioisotope production charged particles are accelerated up to very high energies and caused to collide into a target material.  Examples of such charged particles are protons, alpha particles and deuterons.  New nuclei can be formed when these particles collide with nuclei in the target material.  Some of these nuclei are of value to nuclear medicine.

An example of this method is the production of <sup>22</sup>Na where a target of <sup>24</sup>Mg is bombarded with deuterons, that is: {{nowrap|{{chem|24|Mg}} + {{chem|2|H}} → {{chem|22|Na}} + {{chem|4|He}}.}}

A deuteron you will remember from [[../Atomic & Nuclear Structure|chapter 1]] is the second most common isotope of hydrogen, that is <sup>2</sup>H.  When it collides with a <sup>24</sup>Mg nucleus a <sup>22</sup>Na nucleus plus an alpha particle is produced.  The target is exposed to the deuterons for a period of time and is subsequently processed chemically in order to separate out the <sup>22</sup>Na nuclei.

The type of device commonly used for this method of radioisotope production is called a [[W:Cyclotron|cyclotron]].  It consists of an ion gun for producing the charged particles, electrodes for accelerating them to high energies and a magnet for steering them towards the target material.  All arranged in a circular structure.

== Radioisotope Generator ==

[[File:NM11 2.gif|140px|right]]

This [[W:Technetium-99m generator|method]] is widely used to produce certain short-lived radioisotopes in a hospital or clinic.  It involves obtaining a relatively long-lived radioisotope which decays into the short-lived isotope of interest.

A good example is <sup>99m</sup>Tc which as we have noted before is the most widely used radioisotope in nuclear medicine today.  This isotope has a half-life of six hours which is rather short if we wish to have it delivered directly from a nuclear facility.  Instead the nuclear facility supplies the isotope <sup>99</sup>Mo which decays into <sup>99m</sup>Tc with a half life of about 2.75 days.  The <sup>99</sup>Mo is called the '''parent''' isotope and <sup>99m</sup>Tc is called the '''daughter''' isotope.

So the nuclear facility produces the parent isotope which decays relatively slowly into the daughter isotope and the daughter is separated chemically from the parent at the hospital/clinic.  The chemical separation device is called, in this example, a '''<sup>99m</sup>Tc Generator''':

It consists of a ceramic column with <sup>99</sup>Mo [[W:Adsorption|adsorbed]] onto its top surface.  A solution called an '''eluent''' is passed through the column, reacts chemically with any <sup>99m</sup>Tc and emerges in a chemical form which is suitable for combining with a pharmaceutical to produce a radiopharmaceutical.  The arrangement shown in the figure on the right is called a '''Positive Pressure''' system where the eluent is forced through the ceramic column by a pressure, slightly above atmospheric pressure, in the eluent vial.

The ceramic column and collection vials need to be surrounded by lead shielding for radiation protection purposes.  In addition all components are produced and need to be maintained in a sterile condition since the collected solution will be administered to patients.

Finally an [[Basic Physics of Nuclear Medicine/Gas-Filled Radiation Detectors#Ionisation Chamber|Isotope Calibrator]] is needed when a <sup>99m</sup>Tc Generator is used to determine the radioactivity for preparation of patient doses and to check whether any <sup>99</sup>Mo is present in the collected solution.<br />

== Operation of a 99m-Tc Generator ==

Suppose we have a sample of <sup>99</sup>Mo and suppose that at time <math>t=0</math> there are <math>N_0</math> nuclei in our sample and nothing else. The number <math>N(t)</math> of <sup>99</sup>Mo nuclei decreases with time according to radioactive decay law as discussed in [[Basic Physics of Nuclear Medicine/The Radioactive Decay Law#The Radioactive Decay Law|Chapter 3]]: <br /><br />
<div class="center"><math>
N(t)=N_\mathrm{0}e^{-\lambda_\mathrm{Mo}t}
</math></div><br />
where <math>\lambda_\mathrm{Mo}</math> is the decay constant for <sup>99</sup>Mo.<br /><br />
Thus the number of <sup>99</sup>Mo nuclei that decay during a small time interval <math>dt</math> is given by<br /><br />
<div class="center"><math>
\mathrm{d}N(t)=-\lambda_\mathrm{Mo} N_\mathrm{0} e^{-\lambda_\mathrm{Mo}t}\mathrm{d}t
</math></div><br />
Since <sup>99</sup>Mo decays into <sup>99m</sup>Tc, the same number of <sup>99m</sup>Tc nuclei are formed during the time period <math>dt</math>. At a time <math>t'</math>, only a fraction <math>\mathrm{d}n(t')</math> of these nuclei will still be around since the <sup>99m</sup>Tc is also decaying. The time for <sup>99m</sup>Tc to decay is given by <math>t'-t</math>. Plugging this into radioactive the decay law we arrive at:<br /><br />
<div class="center"><math>
\mathrm{d}n(t')=-\mathrm{d}N(t)e^{-\lambda_\mathrm{Tc}\left(t'-t\right)}=\lambda_\mathrm{Mo} N_\mathrm{0}e^{-\lambda_\mathrm{Mo}t}e^{-\lambda_\mathrm{Tc}\left(t'-t\right)}\mathrm{d}t
</math></div><br />
Now we sum up the little contributions <math>\mathrm{d}n(t')</math>. In other words we integrate over <math>t</math> in order to find the number <math>n(t')</math>, that is the number of all <sup>99m</sup>Tc nuclei present at the time <math>t'</math>:<br /><br />
<div class="center"><math>
n(t')=\int_0^{t'}-\mathrm{d}N(t')e^{-\lambda_\mathrm{Tc}\left(t'-t\right)}=\lambda_\mathrm{Mo}N_\mathrm{0}e^{-\lambda_\mathrm{Tc}t'} \int_0^{t'}e^{\left( \lambda_\mathrm{Tc}-\lambda_\mathrm{Mo}\right)t} \mathrm{d}t
</math></div><br />
Finally solving this integral we find:

<div class="center"><math>
\begin{matrix}
\Rightarrow n(t')&=& \frac{\lambda_\mathrm{Mo}}{\lambda_\mathrm{Tc}-\lambda_\mathrm{Mo}}N_\mathrm{0} e^{-\lambda_\mathrm{Tc}t'}\left(e^{\left( \lambda_\mathrm{Tc}-\lambda_\mathrm{Mo}\right)t'} -1\right) \\
\end{matrix}
</math></div>

The figure below illustrates the outcome of this calculation. The horizontal axis represents time (in days), while the vertical one represents the number of nuclei present (in arbitrary units). The green curve illustrates the exponential decay of a sample of pure <sup>99m</sup>Tc. The red curve shows the number of <sup>99m</sup>Tc nuclei present in a <sup>99m</sup>Tc generator that is never eluted. Finally, the blue curve shows the situation for a <sup>99m</sup>Tc generator that is eluted every 12 hours.

[[File:NM11 10.gif|center|thumb|Comparison of the physical decay of <sup>99m</sup>Tc with its activity arising from <sup>99</sup>Mo decay in a radioisotope generator with and without elution at 12 hour intervals.]]

Photographs taken in a nuclear medicine hot lab are shown below:

{| border=0 cellspacing=4 cellpadding=4 align=center
| [[File:PbShieldingOfALaminarFlowCabinet.jpg|thumb|180px|Pb shielding surrounding the laminar flow cabinet, where radiopharmaceuticals are prepared.]]
| [[File:PbShieldingOfALaminarFlowCabinet2.jpg|thumb|180px|Another view of the Pb shielding surrounding a laminar flow cabinet.]]
|-
|}

== External links ==

*[http://www.bnmsonline.co.uk/index.php?option=com_content&task=view&id=295&Itemid=11 Concerns over Molybdenum Supplies] – news from 2008 compiled by the British Nuclear Medicine Society.
* [http://www.phy.ntnu.edu.tw/ntnujava/viewtopic.php?t=50 Cyclotron Java Applet] – a Java-based interactive demonstration of the operation of a cyclotron from GFu-Kwun Hwang, Dept. of Physics, National Taiwan Normal University, Virtual Physics Laboratory.
* [http://www.ida.liu.se/~her/npp/demo.html Nuclear Power Plant Demonstration] – a Java-based interactive demonstration of controlling a nuclear reactor. Also contains nuclear power Information links.
* [http://www.ansto.gov.au/ ANSTO] – information about Australia's nuclear organization.
* [http://www.nrg-nl.com/public/medical/valley/index.html Medical Valley] – contains information on what nuclear medicine is, production of nuclear pharmaceuticals, molybdenum and technetium – from The Netherlands Energy Research Foundation Petten.

{{BookCat}}