LMIs in Control/pages/Delay Independent Time-Delay Stabilization

From testwiki
Revision as of 15:21, 19 December 2020 by imported>1234qwer1234qwer4 (\times)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Stabilization of Time-Delay Systems - Delay Independent Case

Suppose, for instance, there was a system where a time-delay was introduced. In that instance, stabilization would have to be done in a different manner. The following example demonstrates how one can stabilize such a system independent of the delay.

The System

For this particular problem, suppose that we were given the time-delayed system in the form of:

{x˙(t)=Ax(t)+Ad(td)+Bu(t),x(t)=ϕ(t),t[0,d],0<dd¯,

where

AAdn×n,Bnxr are the system coefficient matrices,ϕ(t) is the initial condition,d represents the time-delay, andd¯ is a known upper-bound of d

Then the LMI for determining the Time-Delay System for the Delay-Independent case would be obtained as described below.

The Data

In order to obtain the LMI, we need the following 3 matrices: A,Ad, and B.

The Optimization Problem

Suppose - for the time-delayed system given above - we were asked to design a memoryless state-feedback control law where u=Kx such that the closed-loop system:

{x˙(t)=(A+BK)x(t)+Ad(td),x(t)=ϕ(t),t[0,d],0<dd¯,

is simultaneously both uniform and asymptotically stable, then the system would be stabilized as follows.

The LMI: The Delay-Independent Stabilization of Time-Delay Systems

From the given pieces of information, it is clear that the optimization problem only has a solution if there exists a matrixWr×n and 2 symmetric matrices X>0 and Y>0 that satisfy the following:

[XAT+AX+BW+WTBT+YAdXXAdTY]<0

Conclusion:

Given the resulting feedback gain matrix K=WX1, it can be observed that the matrix is asymptotically stable while simultaneously ensuring that the solution is delay-independent from the time-delay system where this gain matrix was derived.

Implementation

  • Example Code - A GitHub link that contains code (titled "DelayIndependentTimeDelay.m") that demonstrates how this LMI can be implemented using MATLAB-YALMIP.
  • [[../Delay Dependent Time-Delay Stabilization/]] - Equivalent LMI for delay-dependent time-delay stabilization.

A list of references documenting and validating the LMI.

Return to Main Page:

Template:BookCat